| |
>> Attention All Customers <<
please verify that your paypal receipt has a current
date and transaction number. If your transaction does
not have these two items, and there is no charge
against your account, please email us at
info@manutech.info so we can process order
your manually
USA Customers
All items ship USPS 2-3 day priority mail, usually
within 24 hours of payment clearing.
($6.00 flat rate)
International Customers (outside USA)
All items ship USPS priority mail international,
usually within 24 hours of payment clearing.
Time required for delivery varies with Location.
($16.00 flat rate)
NOTE: USPS does not provide good up to the minute tracking of packages
that ship outside the USA. All you will most likely see, is when the package
is processed at the Post Office, and when it arrives. We are currently looking
into other methods to better serve our international customers.
If items are not in stock, an email will be sent to advise
of estimated ship date.
|
| view the contents of your shopping cart
|
|
|
Rug Runner
genx10 conversion
p/n: 153-000
$89.00
| RUG RUNNER - conversion kit for the genx10. Relocates the battery to the extreme rear of the car for optimal weight transfer. Uses all your existing hardware, and maintains all the original body post positions. Made from 2.75mm thick quasi-isotropic carbon fiber for balanced longitudinal and torsional stiffness. Features a large electronic / radio area for fine balance tuning. Full spare parts support.
(more info)
|
|
| manutech
stickers - SM
p/n: 000-001
$1.00
|
Black or White ManuTech graphics
to compliment your ride and pit gear.
Sheets are 2-1/4" x 5-1/2"
One sheet (random color) free with purchase
|
|
| manutech
stickers - LG
p/n: 000-002
$3.50
|
Black or White ManuTech graphics
to compliment your ride and pit gear.
Sheets are 5-1/2" x 8-1/2"
|
|
|
rc10 B4/T4
weight
p/n: 141-101
$12.00
|
Laser Cut .074" thick 304 Stainless Steel Plate. Weight is approx 70 grams. This plate fits into the bottom of the battery tub and will not add any height to batteries with the bumps on the bottom. If you were able to use the stock set up for the battery strap, you will still be able to when using this plate. Plate will also fit the xxx-cr with a little grinding.
(more info)
|
|
| 12R5/smc
weight
p/n: 133-101
$30.00
| CNC machined brass plate that fits under the lipo battery. Weight varies some from part to part, but average is approx 100 grams. If less weight is required, simply enlarge the predrilled holes. Plate does raise the battery approx .050" from the bottom of the humps. Note: this plate is specifically designed for the 12R5 and the single cell SMC 4000mAh / 25C. It may work with other combinations, click on the "more info" link for all the specs and measurements.
(more info)
|
|
|
genX/smc
weight
p/n: 133-102
$30.00
|
CNC machined brass plate that fits under the lipo battery. Weight varies some from part to part, but average is approx 115 grams. If less weight is required, simply enlarge the predrilled holes. Plate does raise the battery approx .050" from the bottom of the humps. Note: this plate is specifically designed for the GenX Carpet Knife and the single cell SMC 4000mAh / 25C. It may work with other combinations that have the crc stye battery cut outs. Fits in the chassis just like 12R5 plate. See the 12R5 "more info" button for pictures.
|
|
|
416 lipo
weight
p/n: 191-101
$45.00
|
Fits 416 and 416 WE. CNC machined brass plate that fits under the lipo battery. Weight varies some from part to part, but average is approx 115 grams. If less weight is required, simply enlarge the predrilled holes. This plate is offset at an angle near the back eliminating the need for chassis modifications and to help account for the difference in balance with brushless motor setups. Picture shows both sides for clarity.
|
|
|
corally rdx
weight
p/n: 165-101
$45.00
|
CNC machined brass plate that fits under the lipo battery. Weight varies some from part to part, but average is approx 115 grams. If less weight is required, simply enlarge the predrilled holes. This plate has pockets in it for the hump style lipo packs. Picture shows both sides for clarity.
|
|
| cyclone tc
weight
p/n: 181-101
$45.00
| CNC machined brass plate that fits under the lipo battery. Weight varies some from part to part, but average is approx 125 grams. If less weight is required, simply enlarge the predrilled holes. This plate has pockets in it for the hump style lipo packs. Picture shows both sides for clarity.
(more info)
|
|
|
t2 008 lipo
weight
p/n: 134-101
$45.00
| Fits T2 007 / 008 and 009's. CNC machined brass plate that fits under the lipo battery. Weight varies some from part to part, but average is approx 110 grams. If less weight is required, simply enlarge the predrilled holes. This plate is offset at an angle near the back eliminating the need for chassis modifications and to help account for the difference in balance with brushless motor setups. Picture shows both sides for clarity.
(more info)
|
|
|
t2 008 lipo
weight
w/pockets
p/n: 134-102
$45.00
| Fits T2 007 / 008 and 009's. CNC machined brass plate that fits under the lipo battery with humps. Weight varies some from part to part, but average is approx 170 grams. If less weight is required, simply enlarge the predrilled holes. This plate is offset at an angle near the back eliminating the need for chassis modifications and to help account for the difference in balance with brushless motor setups. Picture shows both sides for clarity.
(more info)
|
|
|
steering arm
mi4
p/n: 160-002
$8.00
|
Laser Cut from .060" thk 2024 Alum. This part is made to replace the carbon Steering Arm in the U3501 set. Note that is does not include the mount.
|
|
|
t2 007 lipo
shim kit
p/n: 130-100
$15.00
|
Laser cut shim kit from .074" thick 6061-T6 aluminum. Longer screws will be required, and if using the "stock" battery strap, you will need to adjust the height of the stand-offs to match your battery. This shim kit allows for full support of the upper and lower bearings on the steering shaft.
|
|
|
tc5 lipo weight
w/pockets
p/n: 132-102
$45.00
| CNC machined brass plate with pockets for "hump style packs" that fits under the lipo battery. Weight varies some from part to part, but average is approx 120 grams. If less weight is required, simply enlarge the predrilled holes. This plate will likely work on many other cars if there is at least .060" clearance between the battery and the upper and lower decks. Plate does still have small ridges on the sides to help hold in the flat bottom packs. Picture shows both sides for clarity.
(more info)
|
|
|
kydex bumper
10R5
p/n: 140-104
$10.00
|
CNC machined, 1/8th inch thick, kydex bumper for the 10R5. Same shape, hole pattern and countersunk holes as the stock Bumper. It does weigh a little more than the carbon fiber counterpart, but has lots more flex.
|
|
|
kydex lower
bumper - tc5
p/n: 140-103
$10.00
|
CNC machined, 1/8th inch thick, kydex bumper for the tc5. Fits in-between the lower plate that fastens to the chassis and your existing foam bumper. If you are using a 5/8" thick foam bumper, adding this kydex one to your setup will fill in the extra space and make for a nice tight installation. Works well with parma t2 style foam bumper.
|
|
|
1/10th scale
bumper
p/n: 151-101
$10.00
| CNC machined, 1/8th inch thick, kydex bumper for the gen X-10. Areas around the holes are counter bored to allow for the use of original hardware. Same shape and hole pattern as the stock bumper. It does weigh about 10 grams more than the carbon fiber counterpart, but has lots more flex.
(more info)
|
|
|
1/10th scale
hd bumper
p/n: 151-102
$10.00
| CNC machined, 1/8th inch thick, kydex heavy duty bumper for the gen X-10. Areas around the holes are counter bored to allow for the use of original hardware. Same hole pattern as the stock bumper. This version is approx 36mm wider to help protect the upper steering block and other front end parts from damage.
(more info)
|
|
|
1/10th scale
front shim kit
p/n: 100-100
$5.00
| Laser cut 5052 alum shims for pan car front end ride height adjustment. Designed to work with the crc pro-strut style front end. This shim must be used with the plastic adjusters, it will not work with none of the adjusters installed. Kit includes 4 pieces total. 2 pieces 1.50mm thick, and 2 pieces 0.60mm thick. The intent is to provide fine adjustment to ride height. Holes are 4.0mm in diameter and spaced 36.0mm apart.
|
|
|
battery tray
genX-10/smc
p/n: 151-104
$10.00
|
Laser cut alum plate. Replaces the stock tray, and allows postioning of the smc single cell lipo in three different postitions. Humps on the battery fit into cut outs in the tray to hold position, and to allow lower center of gravity. Upper deck can also be lowered approx .160" to further reduce CG.
(more info)
|
|
|
wide upper brace
crc - 1/10 scale
p/n: 151-103
$12.00
| CNC machined upper brace for crc pro-strut front end when used on the gen-x10 with wide front wheel spacing. Made from g-10 material. This brace mounts directly above the upper a-arm caps. Longer screws are included. This is a bolt on upgrade. For a perfect fit, a small amount of material can be removed from the cap, so that brace will rest flat.
(more info)
|
|
|
upper pod brace
crc - genX
p/n: 151-105
| CNC machined upper pod brace for crc genX pan car. Made from .060" Carbon or 2024 Alum. This is a bolt on upgrade that helps to strengthen the top plate (1765). Longer screws and spacers included. Intent of this brace is to complement the existing top plate.
(more info)
|
|
|
irs ride height
adjuster set
p/n: 170-103
$9.50
| IRS Ride Height Adjusters - IRS P/N: 1167
Set includes two of each - 0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 and 3.5
|
Pan Car Front Shims - quick change shims that will fill CRC style and
both old and new Associated style lower arm hole patterns
|
|
